Ammonia Test Kit

Ammonia

• Accurate in both Fresh and Saltwater

• Must-Have for Every Aquarist

• Essential During New Tank Setup

Ammonia is commonly elevated in new tanks while establishing the beneficial biological filter. High ammonia can also be present in established aquariums from lack of maintenance, overstocking, or when the bio filter has been interrupted by medication. Ammonia can reach lethal levels very rapidly, and should be tested immediately in the case of fish illness or death. Monitor ammonia levels closely when using any medications or treatments.

To remove childproof safety cap, push down while turning. DO NOT allow Test Solutions to get into aquarium.

1. Fill a clean test tube with 5 ml of water to be tested (to the line on the tube).

2. Add 8 drops from Ammonia Test Solution Bottle #1, holding dropper bottle upside down in a completely vertical position to ensure uniformity of drops added to the water sample.

3. Add 8 drops from Ammonia Test Solution Bottle #2, holding dropper bottle upside down in a completely vertical position to ensure uniformity of drops to the water sample.

4. Cap the test tube and shake for 5 seconds.

5. Wait five minutes for the color to develop.

6. Read the test results by matching the color of the solution against those on the appropriate Ammonia Test Color Chart included in the box. Be aware Freshwater and Saltwater results vary slightly.